Specialized Expedition Sport - 2011

The bikes listed below are demo bikes, meaning, they have been used but maintained by professional bike technicians. The bike pictured may not be the exact bike shipped. Sold "as is", some assembly required.
FRAME Specialized A1 Premium Aluminum, Ground Control geometry, 26" comfort frame, formed tubes, forged dropouts w/ replaceable hanger
 
REAR SHOCK ---
 
FORK SR Suntour NEX-4110V2, alloy lower, Hi-Ten stanchions and steerer, coil/Mcu spring, preload adjust, 63mm travel
 
HEADSET 1-1/8" threaded, sealed loose ball bearings
 
STEM Ground Control adjustable rise, alloy head/quill, 2-bolt, 25.4mm clamp
 
HANDLEBARS Comfort riser bar, 60mm rise, 15-degree back sweep, 25.4mm
 
TAPE Body Geometry Comfort, closed end, 92mm
 
FRONT BRAKE Alloy linear pull, 1pc. pad
 
REAR BRAKE Alloy linear pull, 1pc. pad
 
BRAKE LEVERS Alloy 4-finger, Kraton lever for twist shifter
 
FRONT DERAILLEUR Shimano FD-TX50, 31.8mm clamp, top swing, dual pull
 
REAR DERAILLEUR Shimano Altus, 7-speed
 
SHIFT LEVERS Shimano Revo twist, 7-speed
 
CASSETTE Shimano Mega Range, 7-speed, 14-34t
 
CHAIN KMC Z7
 
CRANKSET Shimano FC-M131, w/ chainguard
 
CHAINRINGS 42/34/24, w/ chainguard
 
BOTTOM BRACKET Cartridge bearing, square spindle w/ crank stop right side, capless bolts
 
PEDALS Comfort Pedal, composite body w/rubber top, sealed loose ball
 
RIMS Alloy double-wall
 
FRONT HUB Double sealed, ground race, dual lock nuts w/ 17mm contact side, 5mm QR
 
REAR HUB Double-sealed, ground race, freewheel type, QR
 
SPOKES 2mm (14g) stainless
 
FRONT TIRE Specialized Hemisphere w/ Flak Jacket, 26 TPI, 26x1.95"
 
REAR TIRE Specialized Hemisphere w/ Flak Jacket protection, 26 TPI, 26x1.95"
 
INNER TUBES Schrader valve
 
SADDLE Comfort Plus, dual-density foam, springs
 
SEATPOST A-1 Suspension Seatpost, alloy, 27.2mm w/ 3.8mm spring
 
SEAT BINDER Forged alloy w/ QR
 
NOTES Chainstay protector, derailleur hanger, clear coat, owner's manual, rack mount extensions
 
Specifications subject to change without notice.